Steel Vapor Scrubber Systems
CSS-18 Vapor Scrubber System
The CSS-18 vapor scrubber is ideal for applications which require a small footprint as well as low pressure drop. These units are available with air pneumatic pump or electric pump. 50 gallon solution reservoir is ideal for small tank applications. High quality powder-coating finishes off the unit. Excellent for Frac-Tank emissions during breathing or filling operations. Stainless Steel version available.
| HAZARDOUS VAPOR/VOC | POSSIBLE REMOVAL EFFICIENCES |
| EDC | 99.9% |
| Acids | 99.9% |
| Amines | 99% |
| Acrylates | 99% |
| Mercaptans | 99% |
| Hydrogen Sulfide | 99.9% |
| Wastewater Odors | 99% |
| Hydrocarbons (BTEX, Etc.) | 99% |
| Hazardous Vapor | Recommended Chemical Media for Scrubber |
| Hydrocarbons | Bio-Scrub X |
| H2S | Enviro-Scrub VT |
| Amines | Sulfur-Scrub 43 |
| Others | Contact Vapor Tech |
| Maximum Flow Rate (CFM) | 750 |
| Minimum Flow Rate (CFM) | 5 |
| Maximum Pressure (PSI) | 5 |
| Maximum Temperature (°F) | 140 |
| Pressure Drop Across System (@500 CFM) with Carbon | Approximately 7” of Water |
| Pressure Drop Across System (@500 CFM) without Carbon | Less than 3” of Water |
| Overall Unit Footprint (Skid Size) | 4’ x 5’L |
| Overall Height | 122” |
| Empty Weight (Pounds) | 1100 |
| Vapor Inlet 4” Flange | (150#) |
| Vapor Outlet 4” Flange | (150#) |
| Number of Towers | 1 |
| Tower Diameter (Inches) | 18 |
| Packing Height (Feet) | 5 |
| Reservoir Capacity (Gallons) | 50 |
| Re-Circulation Pump Type | Air Diaphragm Standard (Electric Mag Drive Optional) |
| Number of Pumps | 1 |
| Utility Required | Compressed Air or Nitrogen |
| Pump Air Consumption(SCFM) | 65 |
| Available Blowers | Venturi Air-Horn / 250 CFM Electric |
| Unit Equipped with Mist Eliminator? | YES |
| Surface Area (Square Feet) | 16 |
| Carbon Capacity (Pounds) | 1000 |
| Maximum Temperature (°F) | 140 |
| Temperature Gauge | 0-200°F Dial |
| Liquid Purge Inlet (Used to Flood Bed in Case of High Temperature) | 1/2” Valve |
| Cleanout/Service Ports (One of Each on Carbon Polisher) | 20” Manway |
Related Products
Check out these other great Steel Vapor Scrubber Systems products
Eliminator 550-N1K Scrubber System
The E550-N1K is a complete trailer-mounted vapor scrubber unit designed for vapor flows up to 500 CFM.
Eliminator 5500 Scrubber System
The Eliminator 5500 scrubber unit is designed to treat hydrocarbon and other vapors from Air-Movers and GapVac units which typically have exhaust streams around 5500 CFM.