Steel Vapor Scrubber Systems
SST-20 Vapor Scrubber
Dual column stainless steel scrubber for vapor flows up to 750 CFM. Unit has twin 20" columns and is skid mounted. This unit comes equipped with a magnetic-drive pump (primary) and an air diaphragm pump (backup). Large 20" clean-out ports make maintenance on the reservoir quick and easy. This unit is available for sale and also available in our rental fleet.
| Hazardous Vapor/VOC | Possible Removal Efficiencies |
| EDC | 99% |
| Amines | 99% |
| Acrylates | 99% |
| Mercapatans | 99% |
| Hydrogen Sulfide | 99.9% |
| Wastewater Odors | 99% |
| Hydrocarbons (BTEX, Etc.) | 99% |
| Maximum Flow Rate (CFM) | 750 |
| Minimum Flow Rate (CFM) | 10 |
| Maximum Pressure (PSI) | 2 |
| Maximum Temperature (°F) | 160 |
| Pressure Drop Across System (@500 CFM) with Carbon | Approximately 7” of Water |
| Pressure Drop Across System (@500 CFM) without Carbon | Less than 3” of Water |
| Overall Unit Footprint (Scrubber Skid) | 72”W x 74”L |
| Empty Weight (Pounds) | 1500 |
| Vapor Inlet | 6” Flange |
| Vapor Outlet | 6” Flange |
| Number of Towers | 2 |
| Tower Diameter (Inches) | 20 |
| Packing Height (Feet) | 10 (Total for Both Towers) |
| Reservoir Capacity (Gallons) | 450 |
| Liquid Fill Port | 2” Camlock Connection |
| Re-Circulation Pump Type | Magnetic Drive Pump (1” Pneumatic Backup) |
| Number of Pumps | 2 |
| Utility Required for Pump | Mag-Drive (460V,3P) / Pneumatic (Compressed Air) |
| Pump Air Consumption (SCFM) | 65 |
| Available Blowers | Venturi Air-Horn / 250 CFM Electric |
| Unit Equipped with Mist Eliminator? | YES |
| Cleanout Ports on Scrubber Unit | 2 - 20” Vacuum Lids |
Related Products
Check out these other great Steel Vapor Scrubber Systems products
SST40-N2K System
The SST40-N2K is a trailer-mounted system comprised of a dual stainless steel packed-bed liquid scrubber (SST-40) followed by a 2000# carbon polisher and a 1500 CFM blower.
VTS36-500 Vapor Scrubber System
The VTS36-500 is designed for vacuum truck emissions.