Chemicals & Carbon Media

BIO-SCRUB X

Removes hydrocarbons from airstreams in scrubber units with high efficiency. Bio-Scrub X is used full-strength in a scrubber system and will adsorb many different organic compounds. Some of these include benzene, toluene, xylene, aromatics, gasoline, and many more. Depending on circumstances, this product can absorb up to 98.5% of organics in an airstream before initial saturation. Contains no detergents or deodorants. Diesel Warning: Diesel fuel is not recommended as a substitute for Bio-Scrub X in scrubber systems. Diesel fuel has a high foaming potential and can result in large amounts of liquid carry-over into the outlet of the scrubber and/or carbon bed polishers. Foam in a scrubber will result in much lower removal efficiencies as well. Lastly, diesel fuel is a VOC product whereas Bio-Scrub X is not (prior to accepting VOC vapors).

GC IPA Ammonia Carbon

GC IPA is an impregnated carbon media designed to adsorb and neutralize ammonia and amine vapors.

Darco H2S Carbon Media

Darco H2S carbon media is designed primarily to adsorb and neutralize H2S and other sulfur based 'sewage' odors and vapors. Its unique structure allows for ultra high removal efficiencies versus regular carbon media. Darco also will adsorb hydrocarbons and other compounds as well which makes it very versatile.

Virgin Vapor Phase Carbon

Vapor Tech carries vapor phase (4x10 mesh) granular virgin carbon media. This media works excellent for adsorption of a host of chemical products. Not for use with aldehydes and ketone vapors as they pose a fire risk.

SI-FOAM 10

Si-Foam 10 is a silicone based de-foamer made for industrial applications. It is mainly used in scrubbing systems and applications where foam is problematic. For scrubbing applications, usually only 1/2 to 1 gallon is needed to treat 400-500 gallons of water which has foaming tendencies. Re-treatment may be necessary in scrubber systems over time. Note: Dilution of Si-Foam 10 with water (5:1) recommended prior to addition to the material needing treatment. This helps dispersion into the liquid.

TRI-SOLV

Powerful cutting solvent for many types of synthetic resins, latex, polysulfide sealant, carbon soil, adhesive, carbon epoxy composite, epoxy, and other stubborn substances. Includes three powerful solvents for excellent performance. Environmentally friendly. Contains no chlorinated solvents. Excellent for removal of oils, resins, and synthetic products. Combustible material! 1,1,1, Trichlorethane replacement.

EZ-STRIP

Highly alkaline liquid cleaning agent designed for fast removal of many types of substances including oils, carbon, greases, stains, and many more. Includes foaming agents which enable deep cleaning of porous materials. Highly dilutable formula. Removes broad range of oils and greases. Corrosive material!

PHOS-SCRUB

Powerful water-based cleaning agent comprised of acid, detergents, and solvents. Cleans a wide variety of substances including PCB's, oils, grease, carbon black, and many other stubborn substances. In addition, this product may be used to remove color from tank walls. This product is also used as a scrubbing agent in liquid scrubbers to neutralize amines and ammonia vapors. Dilutes with water. Removes broad range of stubborn chemicals including PCB's. May be used to lower color levels on tank walls. May be used as a liquid scrubbing agent. Corrosive material!

BULLDOGG

BULLDOGG is a complex chemical formula which includes citrus solvents and specialty surfactants coupled with alkaline cleaning technology. The result is a water-based degreaser with the power of most pure solvent cleaners. This product is ideal for cutting crude bottoms, #6 oil, paraffins, and other heavy oils. Furthermore, this product is extremely biodegradable. BULLDOGG may also be used as a degassing agent. Simply dilute with water and coat all internal surfaces containing residues. The LEL levels will begin to drop immediately. In addition, BULLDOGG's powerful formula will clean deep down into the pores of the metal. In many cases we have seen BULLDOGG strip rust and contaminants down to the bare metal!

GRAPE PLUS

One of our strongest deodorant/encapsulation chemical agent. Powerful grape fragrance masks many unpleasant odors. Extremely versatile Highly dilutable with water Non-flammable/Non-hazardous Great for tank cleaning, soil remediation, spill control, and many other applications.

D-ODORIT 100 OB

Oil-based masking agent with many available fragrance options. This product is intended for applications where foam is unacceptable or where an oil must be used instead of a water-based product.

CARBONIL XT

Designed for hydrocarbon emissions and vapor control. Water-based, super concentrated encapsulation and deodorization chemical. Excellent for heavy hydrocarbon and solvent odors. It also neutralizes LEL (Lower Explosion Limit) in enclosed spaces. Non-hazardous, non-flammable formula. Excellent cleaning agent for moderate residues such as oils and grease.

D-ODORIT 300

D-ODORIT 300 is an industrial masking agent (water-based) which also has mild detergents for cleaning and encapsulation properties. Many different fragrances to choose from including rain fresh, grape, cherry, vanilla, pine, and many more. This product has many industrial uses including general odor control, waste-water odor control, spill control, lift station odor control, soil remediation and odor control of contaminated soils and many others. Highly dilutable formula. Non-flammable and non-hazardous. Masks many types of unpleasant odors. Removes light oils and residues.

BSX50-EVT6

BSX50-EVT6 is designed to neutralize H2S and absorb hydrocarbons simultaneously. This product contains high VOC absorbing Bio-Scrub X (for hydrocarbons) and Enviro-Scrub VT 6% (for H2S) in one chemical media. Simply add this media to your scrubber and you are able to remove VOC's and H2S simultaneously. Not for use in packed-column vapor scrubber systems! Excellent for use in bubble-up or forced-induction scrubbers like our E550 units.

ENVIRO-SCRUB VT

ENVIRO-SCRUB VT is a powerful H2S Scavenger. It quickly and safely neutralizes H2S and can be removed from hydrocarbon liquids, scrubber solutions, natural gas, wastewater streams, and many more. Unlike caustic based products, ENVIRO-SCRUB VT will not allow a reverse reaction (which would liberate H2S in an acidic environment) once the reaction has taken place. Furthermore, this product is minimally effected by CO2. Note: Reaction with mercaptans is typically slower and requires longer retention time.

MERCAPTOLYTE 200

When mixed with a light bleach solution (sodium hypochlorite), this product instantly neutralizes the mercaptan and associated odors. Consists of a deodorizer/emulsifier/encapsulator complex. Instantly brings mercaptan into solution (soluble in water) Provides instant odor control for spills or cleaning activities. Excellent for use in scrubber systems

ENVIRO-SCRUB VT (6% Solution)

Enviro-Scrub VT (6% Solution) is a pre-diluted mixture that is designed to quickly neutralize H2S. This 'ready-to-use' solution takes the guesswork out of dilution for a particular job. Since it is already the recommended 6% dilution, not mixing is necessary. Simply add to the reservoir of your scrubber (or tank containing H2S. Each gallon of the 6% diluted solution is able to effectively neutralize .18# of pure H2S. Therefore, a 275 gallon tote of this media is able to neutralize 49.5# of H2S.

CARBONIL XT

Highly concentrated hydrocarbon degassing/deodorization chemical agent. Reduces hydrocarbon VOC emissions and odors immediately! Greatly lowers or eliminates flammability (LEL) of many flammable hydrocarbons and solvents. Highly dilutable formula! Contains very pleasant fragrance. Non-hazardous formula. Approved for use in many major petrochemical plants.

CARBONIL ES

CARBONIL ES was designed for applications which have both hydrocarbon levels and H2S. Instead of using two different chemical agents, simply dilute CARBONIL ES with water and apply to tank contents. LEL will drop immediately as well as H2S levels. CARBONIL ES is also recommended for wet scrubber systems.

CARBONIL ST

Concentrated hydrocarbon degassing agent/encapsulator. Contains no fragrance. Greatly reduces VOC emissions and flammability (LEL). Highly dilutable formula. Non-hazardous formula. Approved in many petrochemical plants.

CARBONIL

Our regular strength hydrocarbon encapsulator. Reduces hydrocarbon VOC emissions and odors immediately! Greatly lowers or eliminates flammability (LEL) of many flammable hydrocarbons and solvents. Dilutable formula. Non-hazardous formula. Economically priced!

EZ-STRIP SS

EZ-STRIP SS is a non-amine based liquid neutralizer for H2S, SO2, and mercaptans (as well as other compounds). This product converts H2S and mercaptans into non-odorous salts. Concentrated formula made up of sodium hydroxide, accelerators and surface tension breaking compounds react quickly. Unlike amine-based product (Enviro-Scrub VT), EZ-STRIP SS is consumed by CO2. If your stream is rich in CO2, consumption of this product will increase.

VAMSOL 40

VAMSOL 40 is a neutralizer for Vinyl Acetate (VAM). High removal capability for VAM (up to 99%). Excellent for use in vapor scrubber systems or for tank and line cleaning.

VAMSOL RTU

VAMSOL RTU is a ready-to-use chemical media designed to neutralize vinyl acetate vapors (VAM). This product uses specialty neutralizers and acceletrators to quickly convert vinyl acetate into non odorous components.

SULFUR SCRUB 43

Sulfur-Scrub 43 is a liquid neutralizer designed to eliminate odors associated with amines or ammonia. This corrosive mixture aggressively neutralizes amines and ammonia and converts them into sulfates. Warning: Not safe for metals (including soft metals, carbon steel, stainless steel, aluminum, etc.)

Chemicals & Carbon Media

Our Distributors